#Kenwood tk 981 manual how to
#Kenwood tk 981 manual windows 10

To program up any TK-981 to the 33cm band will require the KPG-46 or KPG-4 programming cable (both will work). Well, this is done using the EZ-Edit function of KW900EZP, which will allow you to enter in separate transmit and receive frequencies- pretty neat-o! If your using a repeater that has 12MHz offsets you can program those too, but keep in mind that the receive filters will need changing and the VCO will need adjusting- the VCO will do both 25 and 12MHz offset repeaters at the same time! If this all sounds like a lot of work itвЂ™s not, as it takes under 30 seconds to save the programmed KPG-49D file and run KW900EZP - pretty painless and quick. For example a repeater that has an output frequency of 927.6500MHz but an input frequency of 902.0125MHz.

#Kenwood tk 981 manual how to

You may be wondering how to program the radio for a repeater that has an odd split.

the frequencies are modified in the saved. Using KwID.exe or the KW900EZP frequency to FCC ID chart we see that FCC ID 1 corresponds to 927.0125MHz and that FCC ID 79 corresponds to 927.9875MHz, i.e. At this point you may be thinking what good does 935.0125 do us if that amateur band is down at 927MHz? Using PeteвЂ™s program KW900EZP.exe we can change the 935.0125MHz into 927.0125MHz very easily! This is because KW900EZP.exe takes any 935.xxxxMHz frequency and converts it to 927.xxxxMHz, and unless the conventional channel is set to вЂњTalk AroundвЂќ (simplex) will automatically apply a 25MHz offset. For use in the amateur band the only FCC IDвЂ™s we are interested in is 1 through 79 FCC ID 1 being 935.0125MHz and FCC ID 79 being 935.9875MHz. Since this is a commercial radio these numbers range from 1 which represents 935.0125MHz all the way up to 399 which represents a frequency of 939.9875MHz. The radio is programmed using FCC ID numbers.

#Kenwood tk 981 manual windows 10

KPG-49D Version 2 and 3.01 are DOS based and not fun to use, while KPG-49D versions 4.xx are Windows based and will work on ANY Windows computer running 95 thru Windows 10 once again, CPU speed does not matter! There are 5 versions of KPG-49D software, however, for the sake of simplicity and since it is the 21st century, I am only going to speak of versions 4.xx which are Windows based. copyrighted software, not freeware) and then saving the file and running KW900EZP.exe, which is a freeware program developed by Pete, N2MCI. The TK-981, both Version 1 and 2 radios, are programmed for the amateur band by using KPG-49D which is Kenwood programming software (i.e.